Page 2 of 2 FirstFirst 1 2
Results 11 to 12 of 12

Thread: Why "FES" ?

  1. #11
    Join Date
    12.07.2007
    Location
    Czech Republic
    Posts
    731

    Default

    For flash reducer KSO4 or K2SO4 was used.

    „A mind needs books like sword needs a whetstone, if it is to keep its edge“
    Tyrion Lannister

  2. #12
    Join Date
    13.10.2006
    Location
    terra Marahensium
    Posts
    256

    Default

    I will describe how the production took place around these ,,KPS,,.

    The first operation is the grinding of the starting material copper in ball mills to a normal grain. Another operation is when the powder is compressed to roughly shape band.
    Another operation is sintering in a furnace at high temperature -has determined strength and porosity.

    Then the hoop cooked in wax. That fills the gaps between the grains. Wax at a temperature and pressure in the barrel is released and lubricates the friction surfaces and thereby contributes to a greater durability mainly ...

    Another operation was pressing on the body frames and frames machined to size and shape ...
    The disadvantage of brittleness frames versus benefits.
    Usually, the factory was to manufacture frames other than the bodies ... The Protectorate, Czechoslovakia were only two factories, one in operation and one nearing completion.

Page 2 of 2 FirstFirst 1 2

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •